WHY CHOOSE US?
1. 3C standard: Using dedicated chips and dedicated software, can automatically manage the working of solar panel and battery in solar system
2. Support moblie phone charging
3. Safe to use with Built in protection
4. Dual MOSFET Reverse current, protection from lightning strike.
5. Prolong the battery life cycle and keep the load work well.
6. Easy to use and suitable for small solar energy system.
1. Q: How to install the solar controller ?
A: Connect the battery, solar panel, and the load (in proper sequence)
2. Q: How are the wires connected to the controller?
A: Unscrew the screw, fit wire in small hole and screw in to tighten it up
PLEASE READ BEFORE BUYING:
1. This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power.
2. if the LCD display has an error of 0.2 V- 0.3 V, please don’t worry ,it is normal.
3. Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”).
4. Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.
ABOUT THIS CONTROLLER:
*Over charge Protection: 14.4V/28.8V
*Over charge Floating charge: 13.7V/27.4V
*Charge recover voltage: 12.6V/25.2V
*Over discharge Protection: 10.7V/21.4V
*Load Mode: 24 hours, 1-23 hours, 0 hour
*Max input power and voltage: 390W /12V; 780W/24V
*Equalization: B01: sealed 14.4V / B02: Gel 14.2V / B03: flood 14.6V
Make sure this fitsby entering your model number.
UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don’t need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
There are no reviews yet.