4 AWG Battery Cables，Gauge Power Inverter Cables with 5/16″ Ring Terminals for Solar, RV, Auto, Marine Car, Boat （Length 3 ft)

Size: 3 ft-5/16″ Ring Terminals)

Specifications:

A set 4 gauge wire positive (red) and negative (black) battery cables.

Shrink ratio: Approximately 3 to1 at +90°C

Operational temp. range: -55°C to +135°C

Dielectric strength: 500 V/mil (197 kV/cm)

Volume resistivity: 1014 ohm-cm

Tensile strength: 1500 psi

NOTE:

Removing: remove the negative (black) cable before the positive (red) cable.

Installing: install the positive (red) cable first before the negative (black) cable.

Always wear safety glasses when working near batteries.

3 foot 4 AWG battery cable sets come professionally assembled with 5/16″ ring terminals or alligator clamps and are perfect for connecting up to a 1500 watt power inverter to a battery bank or tieing batteries together.replacement automotive, motorcycle, RV, camper, travel trailer & other vehicle wiring applications, grounding cables, golf carts, car audio stereo amplifiers, solar and many other DC applications.

Make sure this fitsby entering your model number.
Copper cables for maximum power transfer. The Maximum operating current is 95A.Each cable has 2 pcs 5/16″ round center hole terminals (already crimped) on both ends.
Used for car, vehicle, RV, solar application, boat, and more,Solar panel, battery to inverter, also used for electrical equipment.
Cable is SAE J1127 compliant and rated for up to 750 volts from -50°C to +105°C.Pure copper cable lugs are tinned coated and utilize a closed end design for corrosion protection.
Polyolefin heat shrink tubing applied to form a protective seal.
Delivery from the United States, fast logistics, guaranteed after-sales!
[amz_corss_sell asin=”B08HXHWN57″]