Aiteme 26A Solar Charge Controller, with Dual USB Port 12V/24V PWM,Display Interface Automatically Switch,Intelligent Protection Regulator (CMB-2426)

Features：
1.Battery low voltage activation function
2.PV-Power technology can be used directly as a charger
3.Lead acid, ternary lithium, lithium iron phosphate battery
4.Settable light control and time control mode
5.Intelligent PWM charging method
6.Automatic identification of system voltage
7.Display interface automatically switch
8.Dual USB 5V output

Specifications:
Max Charging Current: 10A;20A;26A(Optional)
Maximum photovoltaic panel withstand voltage: ≤55V
USB output: 5V 2A
No-load loss：≤10mA
Temperature compensation：-3mV/cell/℃
Operating temperature: -20℃～60℃
Product: 13.2*6.9*2.4cm
Package Size: 14.5*8*4cm

Package List:
1 * Solar Charge Controller
1 * English Manual

Note:
<1>Please keep it in the cool and well-ventilated place to maintain good heat dissipation.
<3>Make sure your battery has enough voltage for the controller to recognize the battery before the first installation.
<3>The connection of solar energy, battery, load, temperature probe, MP15 (reserved), please pay attention to the connection, do not connect wrong, reverse.
<4>Careful your input power and voltage does not exceed solar controller’s max value.

Make sure this fitsby entering your model number.
【Dual USB Port solar controller】5V/2A dual USB ports & 12V/24V battery auto recognition support, Rated Charge & Discharge Current: 26A.The solar charge Controller contains three models which has CMB-2410, CMB-2420 and CMB-2426.
【Multifunction】The solar controller can solve the user’s electricity problem by charging different types of batteries.
【LCD Display】 This solar panel charger controller with LCD to display all parameters, the LCD has rich contents, the users can intuitively know the working condition of the controller. Be suitable for home, industrial, commercial etc.
【Installation Instructions】Connect the leisure battery to the solar charge controller. Make sure that the positive and negative cables are inserted correctly into the device. Clip together the male and female connectors to wire up the solar panel. Then connect the solar panel to the charger controller. Finally, check the set up works by trying out an electrical device like an LED light.
【Multi-Load mode setting】Controller support Manual control, Light control, Light control + specific time delay mode, Day ON Nigh OFF mode.
[amz_corss_sell asin=”B08DRJZ878″]