Safety Instructions: A) Make sure your BAT has enough voltage for the waterproof solar charge controller to recognize the batteries type before first installation and only sufficient voltage can charge or activate the controller. That means it won’t charge or activate when hooked to a dead or low-voltage BAT, or connecting only with PV but without BAT
B) The connection cable should be as short as possible to minimize loss.
C) The solar regulator is only suitable for lead acid batteries: OPEN,AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries.
D) The charge regulator is only suitable for regulating PV. Never connect another charging source to the charge regulator.
How to connect solar system with the controller:
Step 1: Connect the BAT to the solar charge controller firstly- plus and minus.(it will auto adapts to the BAT voltage)
Step 2: Connect the load to the controller secondly.
Step 3: Connect the PV to the controller finally – plus and minus.
♥ Note: The reverse order applies when deinstalling.
◆ Color: Black
◆ Rated Charging Current:10A
◆ Rated Discharging Current:10A
◆ Max Solar Input Voltage: ＜41V
◆ System Voltage:12V/24V Auto Adapt
◆ Self consume: ＜10mA
◆ Operating Temperature: -20 ~ +60℃ ◆ Equalize Charging Voltage:14.4V/28.8V
◆ Bulk Charging Voltage:14.2V/28.4V
◆ Float Charging:13.8V/27.6V
◆ Discharge Stop Voltage:11.2V/22.4V
◆ Discharge Reconnect Voltage:12.6V/25.2V
◆ Housing: Aluminum Alloy
◆ Maximum Wire Size:16AWG
◆ Size/Weight: 3.23* 2.94* 0.83in/0.27lb
● 1 X 10A Waterproof Solar Charge Controller
● 1 X English User Manual
Make sure this fitsby entering your model number.
🙌 INPUT VOLTAGE BETWEEN 15V AND 41V – The 10A solar controller waterproof(IP68) is suitable for Outdoor Use. Intelligent 4-stage PWM charging.The PV can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
🙌 Maximum power of PV is 120W for 12Vdc system and 240W for 24Vdc system, and the maximum current 10A. It is suitable for 12Vdc/24Vdc rechargeable batteries. In order to lengthen its service life, please do not overload.
🙌 EASY TO MONITOR THE LED INDICATOR LIGHTS – The solar controller integrates Three LED indicator lights: green (Charge indicator), White (BAT power indicator) and Red (Output indicator). The product also provides short-circuit, open-circuit, overload protection, as well as Dual MOSFET Reverse current and low heat protection
🙌 PWM CHARGE CONTROLLER – Working mode is 24 hours. Easy to mount directly to the frame of PV, the almost fuselage are surrounded by aluminium with heat sink to dissipate heat.